|
| |
J&M Handlebar Mounted CBs
If you ride with a group, chances are you've wanted to be able to talk to
other riders as you go. Sometimes you need to signal the need for a gas
stop, sometimes you're the lead rider needing to convey directions or warn of
road hazards, and sometimes you just want to talk about the scenery with your
fellow riders.
If two of you ride together on one bike, chances are you've yelled against
the road noise and gestured wildly just to get convey a simple message.
Ever get stuck in a traffic jam and want to know why or how long it's going
to last?
The J&M handlebar-mounted CBs are designed to solve those problems, and then
some. First and foremost, these gadgets are CBs. They let you
communicate with anyone else who has a CB. If others in your group have a
CB, this is a great way to communicate within a riding group. When riding
by myself, I've used my
CB on more than one occasion to talk to semi-truck drivers; sometimes those
conversations are just fun and sometimes quite helpful. On a couple of
occasions, truck drivers have helped me determine how close I was to the end of
a traffic jam. I received lodging recommendation another time.
Second, the CB's also have a built-in NOAA weather radio. If it looks like
you're heading into some ominous weather, you can flip to weather radio mode and
find out what's really going on. if you're stuck under a bridge waiting
for severe weather to pass, you can tune in to find out how long you'll be
there.
Third, you can listen to music through the device. While not a (music)
radio itself, the J&M CB's allow you to plug in any music device with a "mini
headphone" (i.e. "Walkman style") plug. If I know I'll be on the
interstate for a long time, I'll plug in my Mini Disc player and let my favorite
travlin' tunes add something to the monotony that is our super-slab system.
Finally, the "dual rider" version has a built-in intercom. For the
two-up travelers out there, this is a great way to communicate without strain.
To communicate using the CB, use the device's push-to-talk button(s).
For the "solo rider" version, this is located on the device itself, within easy
reach of the rider's left index finger. The dual rider version adds an
additional button that you can fasten to either rear handgrip with hook-and-loop
(formerly known as Velcro) straps.
Please note that you'll need a few elements to make this work
 | CB radio itself (select either solo rider or dual rider version) |
 | CB radio mounting kit |
 | Antenna and associated mounting/wiring kit |
 | Helmet headset |
 | Helmet headset lower cord |
CB Radio
Select either the solo rider or the two-up version.
 larger image |
CB for Rider only
$299.99
List Price:$389.99
CB, NOAA weather radio, and stereo music amplification for rider only
|
|
 larger image |
CB/Intercom for Rider/Co-Rider
$339.99
List Price:$359.99
CB, NOAA weather radio, stereo music amplification, and intercom for rider and passenger/co-rider
|
|
CB Radio Mounting Kit
Select the unit best suited to your bike.
 larger image |
CB Mounting Bracket - Honda
$39.99
This will work on most Honda scooters/motorcycles with a clutch or rear brake lever on the left handlebar. (Will NOT work with Honda Helix, for example.) If the two bolts that secure the clutch/brake fluid rerservoir are not exposed, you may need to trim away some body plastic to use this mount.
NOTE: This will also work with the Suzuki Burgman 650, but not the Burgman 400. You may need to add extra spacers to allow the push-to-talk lever to clear the "shifter" control assembly on the Burgman 650.
|
|
 larger image |
CB Mounting Bracket - Harley
$39.99
This will work for Harley's with 1 inch or 1.25 inch handlebars.
|
|
 larger image |
CB Mounting Bracket - Yamaha
$39.99
This will work with most Yamaha cruisers.
|
|
 larger image |
CB Mounting Bracket - Suzuki
$39.99
This will work with most Suzuki cruisers.
|
|
 larger image |
CB Mounting Bracket - Kawasaki
$39.99
This will work with most Kawasaki cruisers.
|
|
Antenna Kit
Select the antenna height that best fits your needs. In general, the
top of the antenna should reach above your head for best reception.
Considering this, choose the antenna height based upon where you intend to mount
the antenna. If you are going to be mounting it low (on the license plate
frame, for example), get a tall antenna. If you are going to be mounting
it high (under a luggage mounting plate, for example), get a shorter antenna.
Be aware that if your antenna is too tall, you might not be able to ride your
bike into your garage!
Other things to consider when selecting a mounting location for the antenna:
 | If you don't have any luggage system on the back of your bike, mounting
the antenna to your license plate frame is probably the easiest spot to mount
it. |
 | If you do have a top-box on the back of your motorcycle, it is quite
likely that it will interfere with an antenna mounted on the license plate
frame. In this case, you may be
able to fashion a flat-bar that can be mounted between your luggage plate and
the bike. (If you have a GIVI - or similar - mounting plate, you may
need to cut away some of the luggage mounting plate to make this work.) This is how we've
mounted the antenna on Tara's Burgman 650. If you have our Fehling rear
rails, another option that works well is to use the license plate kit to mount
the antenna to the rear rails. We've done this with Ian's Silver Wing. |
 larger image |
License Plate Mount Antenna Kit - 2 Foot
$86.00
List Price:$89.99
Includes black powder coated mounting bracket, antenna staff, mounting stud, frame attachment grounding strap, antenna connection cable, right angle adapter, cable ties, mounting hardware, and complete installation instructions.
|
|
 larger image |
License Plate Mount Antenna Kit - 3 Foot
$86.00
List Price:$89.99
Includes black powder coated mounting bracket, antenna staff, mounting stud, frame attachment grounding strap, antenna connection cable, right angle adapter, cable ties, mounting hardware, and complete installation instructions.
|
|
 larger image |
License Plate Mount Antenna Kit - 4 Foot
$86.00
List Price:$89.99
Includes black powder coated mounting bracket, antenna staff, mounting stud, frame attachment grounding strap, antenna connection cable, right angle adapter, cable ties, mounting hardware, and complete installation instructions.
|
|
Helmet Headset
Choose the model based on your type of helmet. We've had the Elite
headsets installed in 4 of our personal helmets (great product!) over the years but have never
done the installation ourselves. Unfortunately, we can't provide much
advice about the installation process.
Standard (Dual Mode) Series
 larger image |
Dual Mode Headset
$162.00
List Price:$169.99
This helmet headset has been designed to be installed in most open face, flip-front and full-face style helmets. It featuers the new AeroMike® III miniature boom microphone, two top quality helmet speakers in stereo, a universal clamp-on mounting system, and the upper 8 pin helmet cord.
|
|
 larger image |
FF Dual Mode Headset
$162.00
List Price:$169.99
This helmet headset featuers the new AeroMike® III flush mounted chin bar miniature boom microphone, two top quality helmet speakers in stereo, a universal clamp-on mounting system, and the upper 8 pin helmet cord.
This helmet headset has been designed to be installed into most full coverage style helmets with removable cheek pads or a removeable front nose section as part of their interior design.
|
|
Elite (Dual Mode) Series
 larger image |
FF Elite Headset
$210.00
List Price:$229.99
Elite Headset with upper headset cord for full face style helmet.
This new high performance J&M helmet headset has been designed to be installed into most full coverage style helmets with removable cheek pads or front nose section as part of their interior design.
It features two new large diameter, wide fidelity helmet speakers in stereo, the AeroMike® III flush mounted chin-bar microphone, a universal clamp-on mounting system and the 8 pin upper helmet cord.
This is the best performing helmet headset on the market today.
You will appreciate the superior ambient noise canceling and wind blocking ability of the latest version of the AeroMike® III microphone.
The music quality provided by this headset is superb and has been accomplished without any reduction in the headset's ability to provide proper intercom and CB communications (proper acoustical installation required).
|
|
 larger image |
FL Elite Headset
$210.00
List Price:$229.99
This new high performance J&M helmet headset has been designed to be installed into most flip-front and open face (3/4) helmets with removable cheek pads as part of their interior design.
It features two large diameter, fidelity enhanced DynaPort® helmet speakers, the AeroMike® III miniature boom microphone, a universal clamp-on mounting system and the upper 8 pin helmet cord.
This is the best performing helmet headset on the market today.
You will appreciate the superior ambient noise canceling and wind blocking ability of the latest version of the AeroMike® III microphone.
The music quality provided by this headset is superb and has been accomplished without any reduction in the headset's ability to provide proper intercom and CB communications (proper acoustical installation required).
|
|
 larger image |
OF Elite Headset
$210.00
List Price:$229.99
This new high performance J&M helmet headset has been designed to be installed into most open face (3/4) and some of the flip-front style helmets with large, deep ear pockets as part of their interior design.
It features two large diameter, fidelity enhanced DynaPort® helmet speakers, the AeroMike® III miniature boom microphone, a universal clamp-on mounting system and the upper 8 pin helmet cord.
This is the best performing helmet headset on the market today.
You will appreciate the superior ambient noise canceling and wind blocking ability of the latest version of the AeroMike® III microphone.
The music quality provided by this headset is superb and has been accomplished without any reduction in the headset's ability to provide proper intercom and CB communications (proper acoustical installation required).
|
|
Helmet Headset Cords
You need a lower headset cord to plug your helmet headset into the CB.
The headset comes with an upper headset cord, but if you lose it or if it
becomes damaged you might want to purchase another.
 larger image |
Lower Cord for Standard Headset
$22.99
This new economical, 8-pin, lower-section hook-up cord is to be used with all J&M 'CD' series helmet headsets, for connection to 2002 and later J&M® 6-pin audio systems.
|
|
 larger image |
Lower Cord for Elite Headset
$43.50
List Price:$46.99
This heavy-duty, 8-pin, lower-section hook-up cord is to be used with all J&M® Elite Series headset for connection to 2002 and later J&M® 6-pin audio systems.
|
|
 larger image |
Replacement 8 pin upper cord
$34.00
List Price:$35.99
If you lose or damage your 8 pin upper helmet headset cord that comes with either the standard or Elite series headset, this is the replacement.
|
|
Extra Value Deal - Complete Kit
Everything you need bundled together.
 larger image |
Complete CB Package - Solo Rider
$675.00
List Price:$706.99
Individually Priced: $679.48
CB for Rider, Honda CB Mount, Antenna Kit in your choice of heights, 1 Elite Headset in choice choice of helmet style, 1 lower helmet cord.
|
|
 larger image |
Complete CB Package - 2 up, 1 Headset
$710.00
List Price:$766.95
Individually Priced: $719.48
CB/intercom for Rider/Co-Rider, Honda CB Mount, Antenna Kit in your choice of heights, 1 Elite Headset in choice choice of helmet style, 1 lower helmet cord.
This is the choice for you if you currently ride solo but would like the option to add a second headset at some point down the road. (The solo CB can not be converted into a 2 up CB.)
|
|
 larger image |
Complete CB Package - 2 up
$960.00
List Price:$1,043.93
Individually Priced: $972.98
CB/intercom for Rider/Co-Rider, Honda CB Mount, Antenna Kit in your choice of heights, 2 Elite Headsets in choice choice of helmet style, 2 lower helmet cords.
|
|
Other package deals can be arranged. Please let us know what you need
and we'll see what we can do for you.
NOTE: Group Buys
We believe that these CBs add to the enjoyment and - more importantly - the
safety of group riding. We want to encourage those who ride together in
groups to purchase these, so we'll arrange special pricing on purchases of 2 or
more CBs. Please contact us for more
information.
|