|
| |
LED Reflectors
These replacement reflectors have LEDs built in!
| Name |
Description |
Image (click to enlarge) |
Pricing |
| Amber LED Reflectors - pair/rectangle |
These marker lights replace the reflectors found on many
Honda, Suzuki, Yamaha bikes. Each measure 1-1/4" x 3-1/2". These lights
greatly enhance visibility by incorporating 15 mini high visibility LEDs.
Mounts with double sided adhesive to replace both tape and screw mounted
reflectors. NOTE: Sized to fit the front forks on the Suzuki Burgman 650. |
 |
$57.00
List Price:$64.95
|
| Red LED Reflector - pair/round |
These 2-1/8" round LED lights will replace most round
reflectors, making it a universal light. Seventeen bright LEDs for maximum
visibility. Sold as a pair. Sized to replace the rear side reflectors on the Honda Silver Wing and
Suzuki Burgman 650. Other bikes should work too. |
 |
$44.00
List Price:$49.95
|
| Amber LED Reflector - pair/round |
These 2-1/8" round LED lights will replace most round
reflectors, making it a universal light. Seventeen bright LEDs for maximum
visibility. Sold as a pair. Sized to replace the front (fork-mounted) side
reflectors on the Honda Silver Wing and other bikes. |
 |
$44.00
List Price:$49.95
|
| Red LED Reflector - single/rectangle |
These marker lights replace the reflectors found on many
Honda, Suzuki, Yamaha bikes. Each measure 1-1/4" x 3-1/2". These lights
greatly enhance visibility by incorporating 15 mini high visibility LEDs.
Mounts with double sided adhesive to replace both tape and screw mounted
reflectors. NOTE: Sized to fit the rear mud guard on the Honda Silver Wing
and Suzuki Burgman 650. Other bikes should work too. |
 |
$30.00
List Price:$32.95
|
 Full
Bike Reflector Set - with round amber front reflectors |
This set is designed to replace all of the reflectors found
on many bike models (including the Honda Silver Wing). Buy in a set
and save! Includes (from above list):
 | Red LED Reflector - pair/round |
| Amber LED Reflector - pair/round |
| Red LED Reflector - single/rectangle |
|
|
$112.00
List Price:$132.82
|
|
Full
Bike Reflector Set - with rectangular amber front reflectors |
This set is designed to replace all of the reflectors found
on many bike models (including the Suzuki Burgman 650). Buy in a set
and save! Includes (from above list):
| Red LED Reflector - pair/round |
| Amber LED Reflector - pair/rectangle |
| Red LED Reflector - single/rectangle |
|
|
$125.00
List Price:$147.85
|
Adapter Kit
| LED Dual Conversion |
This LED Dual Conversion Harness allows LED marker lights
(like the ones above) to operate as running and turn signal lights
simultaneously. One harness is needed for each individual light. The
LED marker light will remain on while your turn signal is on, and will flash
brighter during the signal's "flashes".
NOTE: Not for use in bikes with a single turn signal indicator light on
the dashboard; you need a separate left turn and right turn indicator on the
bike's dashboard. |
 |
$9.50
List Price:$9.95
|
License Plate Lighting
larger image |
Light Blazer
$65.00
List Price:$65.95
When you ride on public roads it’s all about seeing and being seen. Conspicuity can save your life. We think Lite Blazer is one of the best ways to stand out in traffic.
Simply bolt the unit with its 24 bright LEDs to the lower holes in your license plate. Next, hook up three wires, (tail light, brake light, and ground) and you’re done! When your motorcycle tail light is on, the two outer sets of red LEDs will be illuminated, adding to your conspicuity. Apply either brake and the outer LEDs flash quickly 6 or 7 times and the center LED cluster, which is a bit brighter, lights up too.
LEDs will appear much brighter to drivers behind you if your Lite Blazer is level. So if your license plate hangs perpendicular to the ground, like most Harley-Davidsons, order the straight bracket model. If your plate is inclined, as on most BMWs, order the 15-degree bracket model. Includes heat shrink tubing, crimp-on terminals, wire taps, and instructions. License plate bolts are not included. Slap a Lite Blazer on your ride soon! Specify straight or angled bracket. (NOTE: We stock the angled bracket version but can get the straight bracket version upon request.)
|
|
Dual Intensity LED License Plate Frames
These high intensity LED products are designed to give greater visibility and
conspicuity to your motorcycle. They are unique, because they have been
engineered to function in both high and low intensity brightness for a multitude
of applications. Because many motorcycles have only one brake/running light
bulb, these units can easily be used as back-up brake, and running lights,
providing you a greater degree of safety. Mount these beautifully crafted
license plate frames and give your bike an excellent finished appearance
compared to an otherwise obtrusive license plate.
Features:
| Unique Dual Function Brightness LED's - Can be operated in low or high
intensity brightness (works for both running and brake lights) |
| Low Power Requirements - 12V DC, 1/4 Amp! |
| Dimensions: - "Standard" will fit 49 US states license plates (7-3/16" x
4-1/4"). Measurement from center to center is 5-3/4" x 2-3/4". Slight
re-drilling or filing of bolt holes may be required. Plate may need to be
notched for wire pass through. Custom size available for Maryland. |
| Easy Installation - Includes complete instructions and wiring diagram.
Ultra Bright High Intensity LED's |
| While we only stock these frames in chrome, black frames are available as
well at the same price. Contact us for more
information. |
Frames
larger image |
Single LED Frame - Chrome
$50.00
List Price:$59.95
This frame can be mounted with the LED array at the top or bottom of the frame.
NOTE: Does NOT come with mounting screws/hardware. See below for mounting hardware, or see further below for full kit.
|
|
larger image |
Dual LED Frame - Chrome
$70.00
List Price:$79.95
NOTE: Does NOT come with mounting screws/hardware. See below for mounting hardware, or see further below for full kit.
|
|
Mounting Hardware
larger image |
Flathead Hardware for Frames - Chrome
$8.25
List Price:$8.95
These hardware kits are used to fasten the license plate frames to the motorcycle license plate bracket. Each hardware kit contains 4 of the appropriate screws, nuts and washers for license plate installation.
|
|
Full Kits
larger image |
Single LED Frame Kit - Chrome
$57.50
List Price:$68.90
Combines the "Single LED Frame - Chrome" with the "Flathead Hardware for Frames - Chrome".
|
|
larger image |
Dual LED Frame Kit - Chrome
$77.50
List Price:$88.90
Combines the "Dual LED Frame - Chrome" with the "Flathead Hardware for Frames - Chrome".
|
|
Brake Light Modulators
BackOFF XP
Create more visibility and conspicuity when you are stopped or stopping when
you install the BackOFF-XP™.
This compact solid state electronic module converts your ordinary brake
lights into your choice of two attention getting visual alerting signals when
you apply your brakes:
User Selected Mode One:
Emit a visual signal of 3 short light flashes, followed by 1 long light flash
(3.5 seconds). The signal automatically repeats itself as long as the brakes are
applied. This pattern is not random, but has been selected because of its
ability to retain following drivers attention.
User Selected Mode Two:
Emit a visual signal of 5 short flashes, followed by a steady on light that
remains steady on as long as the brakes are applied.
Optional:
Motorcycle Emergency Flasher or Automobile Back-Up Flasher.
Most states drivers handbooks recommend that you flash your brakes when
slowing or stopping. The BackOFF-XP™ automatically facilitates compliance and
enhances safety. Install the BackOFF-XP™ and see how much more effective your
brake light can be.
Features:
| Easy Installation. - Simply install the BackOFF-XP™ Module in line with
the brake light wire leading to the brake light and connect a ground wire. |
| Large power capacity: - 12 volts DC, Maximum Capacity 10 Amps! |
| Compact size. - 2-1/4"L x 1-5/8"W x 5/8"H |
| Sealed Weather Resistant heat sink case. |
| Limited Warranty - One Year! |
larger image |
BackOFF XP
$37.00
List Price:$39.95
2 mode brake light modulator.
|
|
BackOFF Brake Hold Module
This unit works the same as the BackOFF XP listed above, but adds a new
feature: The Brake Hold Module connects to your bike’s electronic speed pick-up
sensor (will not work with cable driven speedometers - your bike must
have an electronic pick-up sensor); to keep your brake lights on when you
release your brakes but are still decelerating. In addition, it will turn them
on or keep them on when you are are stopped, even if you take your hands and
feet off the brakes!
In addition to "User Mode One" and "User Mode Two" listed above, this unit
features a Brake Alert mechanism: If the Brake Hold Module is holding your brake
lights on for you and you wish to gain the attention of someone behind you;
simply press either brake and your brake lights will flash 5 times then return
to steady on.
larger image |
BackOFF Brake Hold
$57.00
List Price:$59.95
2 mode brake light modulator, includes Brake Hold.
|
|
BackOFF Wig Wag
NOTE: This module is designed for use with motorcycle's
equipped with two brake lights located side-by-side. Do not install this signal
module into a car or truck's brake light or turn signal system as it could
interfere with the proper operation of those systems or cause confusion to
following drivers.
Create more visibility and conspicuity when you are stopped or stopping when
you install the BackOFF-Wig Wag™ Module.
This compact solid state electronic module converts your ordinary brake
lights into your choice of two attention getting visual alerting signals:
User Selected Mode One:
Emits 4 alternating quick flashes of the left and right brake lights,
followed by 3 short flashes and 1 long flash (3.5 seconds) of both brakes
lights. The 3 short flashes and 1 long flash pattern automatically repeats
itself as long as the brakes are held.
User Selected Mode Two:
Emits a visual signal of 4 alternating quick flashes of the left and right
brake lights, followed by 3 short flashes of both brake lights and then the
brake light remains steady until the brake is released.
Most states drivers handbooks recommend that you flash your brakes when
slowing or stopping. The BackOFF-Wig Wag™ automatically facilitates compliance
and enhances safety. Install the BackOFF-Wig Wag™ and see how much more
effective your brake light can be.
Features:
| Easy Installation. - Simply install the BackOFF-Wig Wag™ Module in line
with the brake light wire leading to the brake light and connect a ground
wire. |
| Large power capacity: - 12 volts DC, Maximum Capacity 10 Amps! |
| Compact size. - 2-1/4"L x 1-5/8"W x 5/8"H |
| Sealed Weather Resistant heat sink case. |
| Limited Warranty - One Year! |
larger image |
BackOFF Wig Wag
$37.00
List Price:$39.95
2 mode brake light modulator for bikes with side-by-side brake lights.
NOTE: Wig Wag is not always in stock.
|
|
|
LLC
